Cognex In-Sight 1721, User Manual

Page: 76 / 156

Section 7: Native Mode Commands In-Sight
®
1700 Series Wafer Reader
66
7.1.3 Set Online
SO[ int ]
Sets the In-Sight wafer reader into Online or Offline mode.
NOTE This command cannot set the In-Sight wafer reader Online if it was previously set Offline manually
through the user interface, or by a discrete input signal.
Inputs : 0 to set In-Sight Offline, and 1 to set In-Sight Online.
Output : Status Code.
The status codes are:
STATUS CODE DESCRIPTION
1 The command was executed successfully.
0 Unrecognized command.
-1 The value given for int is either out of range, or is not a valid integer.
-5 The communications flag was successful but the wafer reader did not go Online because the
wafer reader is set Offline manually through the user interface or the Discrete I/O setting is
off.
Sample Input and Output
SO1
1