Club Car CARRYALL 272, Maintenance And Service Manual

Page: 78 / 312

MC012C-BS00 TRANSAXLE: HYDRAULIC AND PARK BRAKE SYSTEMS Hydraulic Line and Hose Replacement
Page 6-26 2006-2010 Turf/Carryall 272/472 and XRT 1200/1200 SE Maintenance and Service Manual
6
Rear Brake Hose Removal, Continued:
4. Use a 3/8-inch flare nut wrench to remove the brake hose from the wheel cylinder (Figure 6-17,
Page 6-18) .
5. Use a 3/8-inch flare nut wrench to remove the rear brake line (10 or 11) from the rear brake hose at the
I-beam of the vehicle frame (Figure 6-20, Page 6-26 or Figure 6-21, Page 6-27) .
6. Remove the horseshoe clip (12) that secures the rear brake hose (9) to the I-beam frame and remove
brake hose (9) through the D-shaped hole in the vehicle I-beam.
7. Repeat steps 4 through 6 for the opposite rear brake hose if necessary.
Figure 6-20 272/1200 Four-Wheel Hydraulic Brake System
TYPICAL
2 PLACES
TYPICAL
BOTH SIDES
TYPICAL
BOTH SIDES
5
7
8
14
14
9
2
1
3
6
12
REFERENCE
MASTER CYLINDER
4
10
11
REFERENCE
FRONT SUSPENSION
REFERENCE
REAR BRAKE
ASSEMBLY
REFERENCE
FRONT BRAKE
ASSEMBLY
13