Club Car CARRYALL 272, Maintenance And Service Manual

Page: 271 / 312

MC012C-BS00 UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK Unitized Transaxle Installation
2006-2010 Turf/Carryall 272/472 and XRT 1200/1200 SE Maintenance and Service Manual Page 16-15
16
UNITIZED TRANSAXLE INSTALLATION
See General Warning, Section 1, Page 1-1.
1. Install the wheels. See General Information, Section 8, Page 8-1.
2. Install the leaf springs. See Multi-Leaf Spring Installation, Section 9, Page 9-3.
3. Position the transaxle mounting plate on the two mounting studs at the rear of the engine, and install the
two mounting nuts (Figure 16-37, Page 16-16) .
4. Install the remaining four mounting bolts and four nuts (one bolt and nut at each corner of the mounting
plate) (Figure 16-37, Page 16-16) .
5. Tighten the four corner nuts (with bolts) to 23 ft-lb (31 N·m). Tighten the two center nuts (on the studs)
to 17 ft-lb (23.1 N·m).
Figure 16-35 Forward/Reverse Shifter Bracket
ClubCar
Club
Car
3
6
7
9
1
2
4