Club Car CARRYALL 272, Maintenance And Service Manual

Page: 229 / 312

FUEL SYSTEM Carburetor
2006-2010 Turf/Carryall 272/472 and XRT 1200/1200 SE Maintenance and Service Manual Page 14-5
14
19. Install the Z-shaped end of the governor cable into the throttle bracket.
20. Install the intake hose (23) and secure with hose clamp (22) (Figure 14-2, Page 14-4) .
NOTE: Make sure the intake hose is not twisted during installation.
21. Turn fuel shut-off valve (on fuel tank) to the ON position (Figure 14-20, Page 14-28, and Figure 14-21,
Page 14-28) .
22. Connect battery and spark plug wire(s). See Connecting The Battery on page 1-3.
23. Test drive the vehicle.
Figure 14-3 Changing the Main Jet
Drain carburetor over
a catch basin by turning
bowl drain screw (11)
counterclockwise
2 to 3 turns.
STEPS 2 AND 3
STEP 4
A
Mark carburetor
and corresponding
position of fuel bowl.
B
Check for
coil located in
groove above
both ears.
Check for
spring seated
in recess of
float body.
If spring looks
like this...
or this...
then adjust
spring to look
like this by...
C
D
holding float firmly...and...
rotating valve counterclockwise
to seat spring in seat of float bowl.
CAUTION: DO NOT REMOVE VALVE/SPRING
FROM FLOAT. TO DO SO WILL DAMAGE SPRING.
1
2
3
4
5
7
8
6
9
11
12
10