Club Car CARRYALL 272, Maintenance And Service Manual

Page: 258 / 312

MC012C-BS00 UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK General Information
Page 16-2 2006-2010 Turf/Carryall 272/472 and XRT 1200/1200 SE Maintenance and Service Manual
16
Shifter Lever
A shifter lever, connected to a shifter arm, is used to change the gears to one of three shift positions: FOR-
WARD (F), NEUTRAL (N), or REVERSE (R)
(Figure 16-2, Page 16-2) . Bring the vehicle to a complete stop
before changing FORWARD or REVERSE direction.
LUBRICATION
There are two oil port plugs located on the right (driven clutch) side of the unitized transaxle (Figure 16-3,
Page 16-2) . When the vehicle is on a level surface, use the upper plug as a lubricant level indicator. Lubricant
level should be even with the bottom of the hole. The lower plug is used for draining. When draining lubricant,
both plugs should be removed to allow the lubricant to drain faster. Be sure the drain plug and gasket are
cleaned and installed before filling the transaxle with new lubricant. Use a funnel when filling the transaxle
through the lubricant fill hole. Fill with MC012C-BS00 – 29 oz. (.85 liters) 80-90 Wt. API class GL-3 or 80-90
Wt. AGMA class 5 EP gear lubricant. Tighten the plug to 20 ft-lb (27.1 N·m).
Differential Lock Lever
The differential lock lever is located between the driver and passenger seats (Figure 16-4, Page 16-2) .
Figure 16-2 Shifter Positions Figure 16-3 Lubricant Level
Figure 16-4 Differential Lock Lever
F N R
SHIFTER
LEVER
SHIFTER
ARM
TOP VIEW
DRAIN
PLUG
C l u b C a r
Lubricant
should be level
with bottom of
level indicator hole.
CCI 10204660
1
REDUCED STEERING
CONTR
OL MA
Y CA
USE
SERIOUS INJUR
Y OR DEA
TH
Disenga
ge diff
erential loc
k on
paved surfaces.
WARNING