Chrysler pacifica hybrid 2017, Owner'S Manual

Page: 33 / 604

NOTE: The vehicle should start charging automatically. If
not, please check the following:
•
Charging Station – Check the indications and instruc-
tions at the charging station or
•
Charging Schedule – Check whether the charging sched-
ule is enabled and if so, whether the vehicle is currently
within the scheduled charge time/date. If the charging
schedule is enabled within the vehicle, you may over-
ride them for this charging event by plugging in the
charge connector, unplugging it, and then plugging it
back into the vehicle charge inlet. Complete the double
plug sequence within 10 seconds for it to override the set
schedule.
To stop the charging process:
•
Press the “STOP” button located on the front of the
EVSE station.
•
Press the button on the charge connector first and then
remove the connector from the vehicle charge inlet
•
Plug the charge handle into the EVSE station and coil the
charging cord onto its holder. Do not leave the charging
cord laying on the ground.
Charging Times
The following factors determine the time it takes to charge
the high voltage battery:
•
The high voltage battery’s current state of charge
•
The type of EVSE used (Level 1 - 120V or Level 2 – 240V)
•
Ambient temperature
•
Whether the vehicle is ON during charging
NOTE:
•
The charging times below are estimates based on a
completely discharged high voltage battery
•
Charging times will vary based on the age, condition,
state of charge, available current being provided to the
charger from its energy source, and temperature of the
high voltage battery.
•
Charging times may be longer if a thermal self-
protection reduces the charging current from the EVSE.
•
If the vehicle’s ignition is in either the ACC or RUN
position, the vehicle charge indicator may not indicate
greater than a 99% state of charge, and will continue to
charge the vehicle, due to the vehicle loads.
3
GETTING TO KNOW YOUR VEHICLE 31