Chrysler pacifica hybrid 2017 Owner'S Manual Download Page 136 | Manualshive

Page: 136 / 604

background image

•

If the power liftgate encounters multiple obstructions
within the same cycle, the system will automatically
stop. If this occurs, the liftgate must be operated manu-
ally.

•

The power liftgate will release, but not power open, in
temperatures below −12° F (−24° C). Be sure to remove
any buildup of snow or ice from the liftgate before
opening the liftgate.

•

If the liftgate is left open for an extended period of time,
the liftgate may need to be closed manually to reset
power liftgate functionality.

WARNING!

•

Driving with the liftgate open can allow poisonous
exhaust gases into your vehicle. You and your pas-
sengers could be injured by these fumes. Keep the
liftgate closed when you are operating the vehicle.

•

If you are required to drive with the liftgate open,
make sure that all windows are closed, and the
climate control blower switch is set at high speed. Do
not use the recirculation mode.

Gas props support the liftgate in the open position. How-
ever, because the gas pressure drops with temperature, it
may be necessary to assist the props when opening the
liftgate in cold weather.

NOTE:

Allow the power system to open the liftgate.

Manually pushing or pulling the liftgate may activate the
liftgate obstacle detection feature and stop the power
operation or reverse its direction.

WARNING!

During power operation, personal injury or cargo
damage may occur. Ensure the liftgate travel path is
clear. Make sure the liftgate is closed and latched
before driving away.

Cargo Area Features

Cargo Area Storage

When the third row seats are not in the stowed position,
there is a large area for cargo storage.

134

GETTING TO KNOW YOUR VEHICLE

«
...
134
135
136
137
138
...
»

Summary of Contents for pacifica hybrid 2017





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for pacifica hybrid 2017

Brand: Kargo Master Pages: 13

Brand: Kargo Master Pages: 21

Brand: Kargo Master Pages: 4

HOIST-A-TOP JL CRANK

Brand: Lange Originals Pages: 13

Brand: RaceChip Pages: 20

Brand: RAM Pages: 292

Brand: RAM Pages: 116

Brand: Kuda-Phonebase Pages: 3

Sprinter Bed System Adventure Wagon Kit

Brand: FVC Pages: 8

Brand: Thule Pages: 8

Brand: AutoWatch Pages: 4

Quattroporte Automatic

Brand: Maserati Pages: 272

Brand: femkes Pages: 7

v.LOGiC Intelligent Solution V5-NTG46

Brand: Caraudio-Systems Pages: 18

Q Access Alpha GSE 2023

Brand: Q Mobility Group Pages: 9

Brand: Rugged Ridge Pages: 3

Brand: Caltrend Pages: 3

Brand: Saturn Pages: 440

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands