Chrysler pacifica hybrid 2017 Owner'S Manual Download Page 32 | Manualshive

Page: 32 / 604

background image

2. The device must accept any interference received, in-

cluding interference that may cause undesired operation
of the device.

Changes or modifications to any of these systems by other
than an authorized service facility could void authorization
to use this equipment.

This unit complies with ICES-003E of Industry Canada,
and EMC Directive 2004/108/EC.

Guidelines for preventing fire and electric shock:

•

Ensure the charging cable is positioned so it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.

•

There are no user serviceable parts inside.

•

Do not use the charging cordset if it is visibly damaged.
Contact your authorized dealer for service.

•

Do not place fingers, or any other objects inside the
charge connector.

•

Do not allow children to operate this device. Adult
supervision is mandatory when children are in proxim-
ity when the charging cordset is in use.

NOTE:

During normal operation, the charge connector or

AC plug may feel warm. If either one feels hot during
charging, unplug the charging cordset and have a qualified
electrician inspect the wall receptacle before you continue
charging.

WARNING!

Do not use the charging cordset with a receptacle that
is worn or damaged. Using the charging cordset with a
worn or damaged receptacle may cause burns or start a
fire.

AC Level 2 Charging (240V, 30 Amp)

AC Level 2 (240 V) charging requires a 240 V, Level 2 EVSE
(Charging station). A 30 A Level 2 EVSE for home instal-
lation is recommended.

When using public charging stations, ensure the charging
station is ready to provide charge and the vehicle is in
PARK before the charge connector is plugged into the
vehicle’s charge inlet. You will hear a “click” when the
charge connector is inserted correctly and is coupled with
the vehicle’s charge inlet. The vehicle should start charging
automatically. If not, please check the instructions at the
charging station.

30

GETTING TO KNOW YOUR VEHICLE

«
...
30
31
32
33
34
...
»

Summary of Contents for pacifica hybrid 2017





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for pacifica hybrid 2017

Brand: Metra Electronics Pages: 14

Wireless Charging Station Universal

Brand: BMW Pages: 160

Brand: Saab Pages: 3

Brand: Hama Pages: 75

Brand: Honda Pages: 85

Brand: HAUL MASTER Pages: 8

Brand: Volvo Pages: 24

Truck Training Model

Brand: WABCO Pages: 56

1966 Spider 105

Brand: Alfa Romeo Pages: 46

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: r.LiNK Pages: 20

Brand: AL-KO Pages: 40

Brand: Maserati Pages: 37

Halo Pole Mount

Brand: Charge Amps Pages: 14

Brand: Opel Pages: 242

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 17

Brand: Kia Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands