manualshive.com logo in svg

Chrysler pacifica hybrid 2017, Owner'S Manual

The 2017 Chrysler Pacifica Hybrid comes with an informative Owner's Manual that provides detailed instructions and guidelines for maximizing the potential of your vehicle. You can easily download this manual for free from our website, ensuring that you have access to all the information you need to enjoy your Pacifica Hybrid to the fullest.

Share
Download
background image

STARTING PROCEDURES

Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belts.

WARNING!

•

When leaving the vehicle, always remove the key fob
from the vehicle and lock your vehicle.

•

Never leave children alone in a vehicle, or with
access to an unlocked vehicle.

•

Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or others
could be seriously or fatally injured. Children
should be warned not to touch the parking brake,
brake pedal or the transmission gear selector.

•

Do not leave the key fob in or near the vehicle, or in
a location accessible to children, and do not leave the
ignition of a vehicle equipped with Keyless Enter-
N-Go in the ACC or ON/RUN mode. A child could
operate power windows, other controls, or move the
vehicle.

•

Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up may
cause serious injury or death.

Start the engine with the gear selector in the PARK
position. Apply the brake before shifting to any driving
range.

Normal Starting

NOTE:

Normal starting of either a cold or a warm engine

is obtained without pumping or pressing the accelerator
pedal.

To Turn On The Vehicle Using ENGINE START/STOP
Button

1. The transmission must be in PARK or NEUTRAL.

NOTE:

If the transmission is in NEUTRAL, and the speed

is less than 1 mph (2 km/h), the vehicle will automatically
shift to PARK.

2. Press and hold the brake pedal while pushing the

ENGINE START/STOP button once.

3. The vehicle will go into Drive Ready mode (silent start,

and “ready” is indicated on the cluster without the
engine running), which may include the start of the
engine depending on conditions such as battery state of
charge and vehicle temperature.

4. If you wish to stop the vehicle from achieving Drive

Ready mode, push the button again.

284

STARTING AND OPERATING

Summary of Contents for pacifica hybrid 2017





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for pacifica hybrid 2017

Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
RAM CHASSIS CAB 3500 2017 Quick Reference Manual preview
CHASSIS CAB 3500 2017
Brand: RAM Pages: 16
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
Metra Electronics 95-8202 Installation Instructions Manual preview
95-8202
Brand: Metra Electronics Pages: 20
SAAS StreetLine Series Installation Instructions preview
StreetLine Series
Brand: SAAS Pages: 4
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
Gator GT700SD User Manual preview
GT700SD
Brand: Gator Pages: 6
F.lli Menabo CROSS 2 Assembly Instructions Manual preview
CROSS 2
Brand: F.lli Menabo Pages: 16
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8
Saab 2006 9-5 Owner'S Manual preview
2006 9-5
Brand: Saab Pages: 288
iSimple IS7705 Installation & Operation Manual preview
IS7705
Brand: iSimple Pages: 8

Brands by name

Popular brands

Load more brands