Chrysler pacifica hybrid 2017 Owner'S Manual Download Page 546

Page: 546 / 604

Play A DVD/Blu-ray Or USB Media File From
Uconnect System

1. Insert a Blu-ray disc or DVD disc into the disc player

with the label facing up. Or insert a USB drive into rear
Video USB port.

NOTE:

The DVD/Blu-ray Disc player and Video USB port

are both located under the radio controls in the instrument
panel.

2. Press the “Uconnect Theater” button on the radio touch-

screen.

Refer to “Accessing The System From The Uconnect Ra-
dio” in this section for further information.

3. Select Disc or USB from the source controls on the

desired screen (1 or 2).

NOTE:

To play a DVD/Blu-ray disc on both screens

simultaneously, select disc from both screen drop downs,
or choose disc source on one screen and push “View
Screen” button on the other.

4. For DVD/Blu-ray disc – press Movie Snapshot on radio

touchscreen, then press “OK” on following screen. For
USB Media Files - Press Music, Movie, or Folders, then
select media title from list(s).

DVD Blu-ray Disc Player

1 — Disc Player (Rear)
2 — Rear Video USB Port

544

MULTIMEDIA

Summary of Contents for pacifica hybrid 2017





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for pacifica hybrid 2017

Reviews:

Related manuals for pacifica hybrid 2017

Brands by name

Popular brands

Chrysler pacifica hybrid 2017, Owner'S Manual

Search results

Summary of Contents for pacifica hybrid 2017

Reviews:

Related manuals for pacifica hybrid 2017

Brands by name

Popular brands