Chrysler 300 Touring RWD 2010 Owner'S Manual Download Page 285

Page: 285 / 574

•

Temperature

Select from: “°C,” or “°F.”
After the desired setting has been selected, press the back

arrow button on the touchscreen to return to the previous

menu.

Voice

After pressing the “Voice” button on the touchscreen the

following settings will be available:

•

Voice Response Length

When in this display, you may change the Voice Re-

sponse Length settings. To change the Voice Response

Length, press the “Brief” or “Detailed” button on the

touchscreen until a check-mark appears next to the

setting, showing that setting has been selected. Press the

back arrow button on the touchscreen to return to the

previous menu.

•

Show Command List

When in this display, you may change the Show Com-

mand List settings. To change the Show Command List

settings, press the “Always,” “With Help” or “Never”

button on the touchscreen until a check-mark appears

next to the setting, showing that setting has been se-

lected. Press the back arrow button on the touchscreen to

return to the previous menu.

Clock

After pressing the “Clock” button on the touchscreen the

following settings will be available:

•

Sync Time With GPS

This feature will allow you to automatically have the

radio set the time. To change the Sync Time setting, press

the “Sync time with GPS” button on the touchscreen until

a check-mark appears next to the setting, showing that

UNDERSTANDING YOUR INSTRUMENT PANEL 283

Summary of Contents for 300 Touring RWD 2010































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 Touring RWD 2010

Reviews:

Brands by name

Popular brands

Chrysler 300 Touring RWD 2010, Owner'S Manual

Search results

Summary of Contents for 300 Touring RWD 2010

Reviews:

Brands by name

Popular brands