manualshive.com logo in svg

Casio ClassPad II fx-CP400+E, User Manual

Share
Download
Casio ClassPad II fx-CP400+E User Manual Download Page 175

Chapter 8: Geometry Application

  

175

 

u

To add an animation and run it

1. Plot a point and draw a figure (here we draw a parallelogram). Or, you could 

draw a circle, arc, ellipse, line segment, or function instead of a figure.

2. Select the point and a side of the parallelogram. 

3. Tap [Edit], [Animate], and then [Add Animation].

• The point selected in step 2 moves along the side of the parallelogram.

4. Tap [Edit], [Animate], and then [Go (once)], [Go (repeat)], or [Go (to and fro)].

Point A moves along side CD. 

5. Tap [Edit], [Animate], and then [Stop] to stop the animation.

• You can also stop the animation by tapping 

l

 on the icon panel.

 

u

To replace the current animation with a new one

1. Select the point and curve for the new animation.

2. Tap [Edit], [Animate], and then [Replace Animation].

• This discards the currently set animation and sets up an animation for a new point and curve set. Tap 

[Edit], [Animate], and then [Go (once)] to see your new animation.

 

u

To trace a locus of points

Note:

  Using trace leaves a trail of points when the animation is run. The 

procedure below is a continuation of the procedure under “To add an 
animation and run it”. 

1. Draw a line segment that connects point A with apex B. 

2. Draw the center point of line segment AB. 

• Select line segment and then tap [Draw] - [Construct] - [Midpoint].

3. Select the center point of line segment AB (point F) and then tap [Edit] - 

[Animate] - [Trace]. 

4. Tap [Edit], [Animate], and then [Go (once)].

• This draws a line using point F as the locus, that is parallel to and whose 

length is half that of side CD of the parallelogram.

 0805 

  To create an animation that traces the locus of specific points

Summary of Contents for ClassPad II fx-CP400+E





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands