manualshive.com logo in svg

Casio ClassPad II fx-CP400+E, User Manual

The Casio ClassPad II fx-CP400+E boasts a powerful yet user-friendly interface for students and professionals alike. Unlocking the full potential of this graphing calculator is made effortless with our comprehensive User Manual. Download it for free from manualshive.com to access step-by-step instructions and maximize your experience with this incredible product.

Share
Download
background image

Chapter 8: Geometry Application

  

169

Specifying the Color and Line Type of a Displayed Object

You can use the procedure below to specify the color and line type for the outline of a figure, the fill color inside 
a figure, or the color of text, labels, and other non-figure objects.

 

u

To specify the color and line type of a particular object

1. Use the procedure under “Selecting and Deselecting Figures” (page 167) to 

select the object whose color and/or line type you want to specify.

2. Tap [Edit] and then [Style] to display the dialog box shown to the right.

• The dialog box will show only supported settings, which depend on the 

composition of the selected object. 

3. Configure the dialog box with the following settings.

To specify this:

Perform this operation:

Specify the text color

Tap “Character Color” and then tap the desired color.

Specify the line type

Tap “Graph Plot” and then tap the desired line type.

Specify the line color

Tap “Line Color” and then tap the desired color.

Specify the figure fill color

Tap “Area Color” and then tap the desired color. To specify no fill color, 
tap “Clear”.

4. To apply the settings you configure, return to the dialog box in step 2 of this procedure and then tap [OK].

 

u

To specify the color and line type of all the objects on the Geometry window

1. Tap anywhere on the screen where there are no figures to deselect all of the figures.

2. Perform the procedure from step 2 under “To specify the color and line type of a particular object”.

Changing the Display Priority of Objects

Basically, objects you draw on the Geometry window are stacked in the order they are drawn (newest drawing 
on top). You can use the operations in this section to move a drawn object to the top or the bottom of the stack. 
You also can move all text to the front, if you want.

• To move a particular object to the front, select it and then tap [Edit] - [Properties] - [To the front].

• To move a particular object to the back, select it and then tap [Edit] - [Properties] - [To the back].

• To move all text to the front, tap [Edit], [Properties] and then [All Text].

Summary of Contents for ClassPad II fx-CP400+E





























































































































































































































































































































Reviews:

No comments

Related manuals for ClassPad II fx-CP400+E

PVI VeCOAX PIXEL Manual preview
VeCOAX PIXEL
Brand: PVI Pages: 13
Sharp ESLI MATE EL-2128V Operation Manual preview
ESLI MATE EL-2128V
Brand: Sharp Pages: 2
Sharp Elsimate EL-S25 Operation Manual preview
Elsimate EL-S25
Brand: Sharp Pages: 2
Sharp ELSIMATE EL-M332 Operation Manual preview
ELSIMATE EL-M332
Brand: Sharp Pages: 2
Sharp ELSIMATE EL-782C Operation Manual preview
ELSIMATE EL-782C
Brand: Sharp Pages: 2
Sharp ELSIMATE EL-344R Operation Manual preview
ELSIMATE EL-344R
Brand: Sharp Pages: 2
Televes TDT+ User Manual preview
TDT+
Brand: Televes Pages: 44
Casio DJ0120D User Manual preview
DJ0120D
Brand: Casio Pages: 20
Casio DJ-120D plus User Manual preview
DJ-120D plus
Brand: Casio Pages: 87
RCA DH91RF User Manual preview
DH91RF
Brand: RCA Pages: 8
Casio fx-3400P User Manual preview
fx-3400P
Brand: Casio Pages: 50
Casio FX-250D Manual preview
FX-250D
Brand: Casio Pages: 76
Olympia CPD 435 Operating Instructions Manual preview
CPD 435
Brand: Olympia Pages: 26
GSS HDM 500 C Assembly Instructions Manual preview
HDM 500 C
Brand: GSS Pages: 22
GSS HDMT 1290 Assembly Instructions Manual preview
HDMT 1290
Brand: GSS Pages: 32
GSS HDM 2380 OIRT CI Assembly Instructions Manual preview
HDM 2380 OIRT CI
Brand: GSS Pages: 37
Data-Tronix DT-ATSC-QAM-8V2 User Manual preview
DT-ATSC-QAM-8V2
Brand: Data-Tronix Pages: 22
Citizen SRP-285II User Manual preview
SRP-285II
Brand: Citizen Pages: 20

Brands by name

Popular brands

Load more brands