Carrier VECTOR 1800 MT, Operation & Service Manual

Page: 72 / 315

62-11039 3-22
3.15 VIEW HOURMETERS
COOL DEFROST ALARM START-STOP
SETPOINT BOX TEMPERATURE
ALARM LIST
SELECT MANUAL
DEFROST
HEAT CONTINUOUS
+36 F
-20
START--STOP/
CONTINUOUS
2
TOTAL ENGINE HOURS: 0 HRS
1. Press the SELECT key until the
MessageCenter displays
“PRESS
↑↓
TO VIEW HOURMETERS”.
2. Press the UP or DOWN ARROW key to move
through the Hourmeter List.
5. Selected Hourmeter will remain in the
MessageCenter for 10 seconds, then the default message (STATUS OK)
or other customer specified message) will appear.
6. To lock an hourmeter in the MessageCenter, press the = key.
The Data item will flash continuously to indicate it is locked.
7
. Pressing any key on the keypad will unlock the item. Pressing the
UP or DOWN ARROW key will move to the next hourmeter.
3. Displayed hourmeters will depend on unit configurations (See Section 5.2.1). Typical
displayed meters are: “TOTAL ENGINE HOURS”,
“STANDBY RUN HOURS” and “TOTAL SWITCH ON HOURS”.
4.
Pressing the = key will access all other meters and display
“OTHER METERS AND COUNTERS”.
Hourmeters available when “OTHER METERS AND
COUNTERS” is chosen are:
S
Meters listed in Step 3 above.
S
Switch On Standby Hours
S
Engine Protect Hours
S
Switch On Protect Hours
S
Switch On Sleep Hours
S
Engine Sleep Hours
S
High Speed Hours
S
Start cycles