Canon MultiPASS C20, User Manual

Page: 93 / 277

Chapter 2 Setting Up Your MultiPASS C20
2-65
Setting Up Your
MultiPASS C20
ALARM VOLUME Sets the volume of the error VOL MID/ 2-67
alarm sound. VOL MAX/
OFF/
VOL MIN
LINE MONITOR VOL
Sets the volume of the line
VOL MID/
2-67
monitor (sound during
VOL MAX/
dialling
). OFF/
VOL MIN
RX CALL LEVEL Sets the volume of incoming STANDARD / 2-68
calls. HIGH
TEL LINE TYPE Sets the dialling method the ROTARY PULSE*/ 2-55
MultiPASS C20 uses to match TOUCH TONE
the type of line you have.
PRINT REPORT
ACTIVITY REPORT
Prints a record of the last 20 — —
trasmissions your unit sends
or receives.
SPEED DIAL LIST Prints a list of registerd — —
telephone numbers.
USER’S DATA LIST Prints information registered — —
in your unit.
R-KEY SETTING Sets the PBX type through PSTN / 3-34
which your unit is connected. PBX
M-KEY SETTING
Sets the access and ID code
OFF/
3-39
(UK only) for the 2300 service of Mercury
ON
Communications Limited.
MID PAUSE SET
Sets the length of the pause
04 SEC**
2-68
(UK only) entered by each press of the
(04–11)
( REDIAL ) /PAUSE button.
* The factory default setting is ROTARY PULSE for all countries except the UK and Singapore.
The factory default setting for the UK and Singapore is TOUCH TONE.
** The pause length can only be adjusted in the UK. The pause length is fixed to four seconds in
Hong Kong, and to two seconds in all other countries.
Setting Description Settings Page