manualshive.com logo in svg

Canon MultiPASS C20, User Manual

Share
Download
Canon MultiPASS C20 User Manual Download Page 24

1-12

Introducing the MultiPASS C20

Chapter 1

❏

Do not insert objects of any kind into the slots or openings on the
MultiPASS C20’s cabinet, as they could touch dangerous voltage
points or short out parts, and result in fire or electric shock. 

❏

Do not allow small objects (such as pins, paper clips, or staples) to
fall into the MultiPASS C20. If something does fall into it, unplug
the unit immediately and call your local authorised Canon dealer or
service centre.

❏

Always unplug the MultiPASS C20 before moving or cleaning it.

❏

Whenever you unplug the MultiPASS C20, wait at least five
seconds before you plug it back in.

❏

Keep the MultiPASS C20 away from direct sunlight, as this can
damage it. If you have to place it near a window, install heavy
curtains or blinds.

❏

Do not expose the MultiPASS C20 to extreme temperature
fluctuations. Install the unit in a place with temperatures in the
10°–32.5°C range.

❏

Always unplug the MultiPASS C20 during thunderstorms.

❏

Before you transport the MultiPASS C20, remove its BJ cartridge.

❏

Always lift the MultiPASS C20 as shown below. Never lift it by its
sheet feeder or document supports.

Summary of Contents for MultiPASS C20






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands