Canon MultiPASS C20, User Manual

Page: 261 / 277

Glossary
G-13
Glossar
y
Redialling-manual
When you use the regular dialling method, you can quickly call the last
number dialled by pressing the
(REDIAL)/PAUSE button.
Reduction mode
The MultiPASS C20’s automatic feature that slightly reduces the
received image to allow room at the top of the page for the sender’s ID
information. You can also reduce the size of large incoming documents
using the RX REDUCTION option.
Registering
A process by which you place fax or telephone numbers and names in
the MultiPASS C20’s memory for automatic dialling so that you can
save time dialling frequently called destinations. See
Address Book .
Regular dialling
Pressing the individual numeric buttons to dial a fax or telephone
number.
Remote receiving ID
The two-digit code that enables you to manually activate a fax using an
extension phone that is connected to the MultiPASS C20.
Remote reception
Activating a fax by answering an extension telephone that is connected
to the MultiPASS C20, but that is not located near the MultiPASS C20.
You need to dial a remote receiving ID number to start remote
reception.
Reports
A document printed by the MultiPASS C20 and containing information
about the faxes it has sent or received.
Reset
A way to clear printer errors; turn the printer mode off and then back
on again.
Resolution
The density of dots for any given output device. Expressed in terms of
dots per inch (dpi). Low resolution causes font characters and graphics
to have a jagged appearance. Higher resolution means smoother curves
and angles as well as a better match to traditional typeface designs.
Resolution values are represented by horizontal data and vertical data,
for example, 360
×
360 dpi. This printer can produce output with
resolutions up to 720
×
360 dpi precision.