manualshive.com logo in svg

Canon MultiPASS C20, User Manual

Share
Download
Canon MultiPASS C20 User Manual Download Page 46

2-18

Setting Up Your MultiPASS C20

Chapter 2

Attaching the Document Support

The document support catches documents as they come out of the
MultiPASS C20 after being faxed or scanned. You can operate the
MultiPASS C20 with or without this support.

The ends of the metal support fit into the slots on the front of the
MultiPASS C20, as shown below. To install it, slightly squeeze the ends
of the support toward each other, insert them in the slots, and gently
release them. Then slide the support into the unit until it clicks in
position.

When the support is installed, you can pull it out or push it in to suit the
size of the document.

N

❏

When inserting the document support, make sure that it curves
upwards, as shown in the figures above.

❏

If you do not wish to use the support, you can remove it completely.

Summary of Contents for MultiPASS C20






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands