manualshive.com logo in svg

Canon MultiPASS C20, User Manual

Share
Download
Canon MultiPASS C20 User Manual Download Page 125

Chapter 3

Sending and Receiving Faxes

3-27

Sending and

Receiving Faxes

N

After entering the first one-touch speed dialling button or coded speed
dialling code, you have five seconds to enter another speed dialling
button or code before the MultiPASS C20 begins sending automatically.
If you have entered more than one speed dialling button or code, the
MultiPASS C20 waits for 10 seconds before it begins sending.

3.

When you finish entering numbers, press 

START/COPY

to begin

sending, or wait a few seconds for the MultiPASS C20 to begin
sending automatically.

❑

The MultiPASS C20 then scans the document into memory, and
begins sending it to the destinations in numerical order, starting
with the coded dial numbers, then the one-touch numbers, and
finally the manual number (if there is one).

N

If the MultiPASS C20’s memory becomes full while scanning your
document, MEMORY FULL appears in the LCD. If this happens, remove
the remainder of the document from the Automatic Document Feeder
(ADF) (you may need to open the operation panel to do so), then divide
the document into several sections and send each section individually.

Summary of Contents for MultiPASS C20






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands