Canon MultiPASS C20, User Manual

Page: 106 / 277

3-8
Sending and Receiving Faxes Chapter 3
Memory Sending
Memory sending is a quick and easy way to send a fax. When you use
memory sending, the MultiPASS C20 scans the document into its
memory as it dials the fax number. If the line is free, the MultiPASS C20
begins sending the fax as it scans the rest of the document.
The MultiPASS C20 has enough memory to store up to 42 pages (fewer
if the document contains many graphics or particularly dense text).
Since the MultiPASS C20 is a multitasking device, you can use memory
sending to scan one document into memory and at the same time send
another fax, receive a fax, or print a document. Follow the instructions
below to send a document with memory sending:
1. Prepare the document, load it into the Automatic Document Feeder
(ADF), and adjust the resolution as described in “Loading the
Document” on page 4-5.
❏
You may not be able to use memory sending if the percentage
shown in the MEMORY USED display is close to 100%. In this
case, use manual sending via the handset to send your
document.
2. Use the numeric buttons to dial the other party’s fax number.
Ex:
❏
You can either dial the number directly, or use one of the speed
dialling methods described in “Automatic Speed Dialling” on
page 3-11.
❏
If you must first dial a digit to get an outside line (e.g. “9”),
press the
( REDIAL)/PAUSE button to add a pause after
that digit, as shown in the example above.
3. Press START/COPY .
❏
The MultiPASS C20 then begins scanning the document into
memory, and dials the number:
After a few seconds, the display shows the number of pages it
has scanned:
SCANNING P.001
TX
TEL=9p1503753798
1 2
ABC
3
DEF
4 5
JKL GHI
6
MNO
7 8
TUV PQRS
9
WXYZ
0