manualshive.com logo in svg

Canon MultiPASS C20, User Manual

Share
Download
Canon MultiPASS C20 User Manual Download Page 160

4-8

Scanning Documents and Making Copies

Chapter 4

Trouble with Multipage Documents

If you have trouble feeding a multipage document, do the following:

1.

Remove the stack and tap it on a flat surface to even the edges.

2.

“Slant” the stack so that its front edge is bevelled as shown below,
then insert the stack into the Automatic Document Feeder (ADF).

N

❏

If you have further trouble with page jams while feeding, see “Jams
in the Automatic Document Feeder (ADF)” on page 6-6.

❏

You cannot feed a multipage document of thick media, such as
postcards or business cards.

❏

Wait until all pages of your document have been scanned
completely before starting a new scanning job.

Summary of Contents for MultiPASS C20






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands