Canon imageRUNNER ADVANCE C3325 Series Service Manual Download

Page: 177 / 951

2-141

Technical Explanation > Embedded RDS > Error code and strings

Error code and strings

The following error information is displayed on the communication error log details screen.
(Here, "server" means UGW.)

• The error information are displayed in the following form.

[*] [Character strings] [Functional classification (Method name)] [Error details provided by
UGW]

NOTE:

"*" is added to the top of the error text in the case of an error in communication test

(method name: getConfiguration or communicationTest) only.

No.

Code

Character strings

Cause

Remedy

0000 0000 SUSPEND: mode

changed.

Unmatched Operation Mode Initialize the E-RDS setting

(ERDS-DAT).

0500 0003 SUSPEND:

Communication test

is not performed.

Turning OFF and then ON the

main power of this machine

while the communication

test had not been performed

although E-RDS is enabled.

Perform a communication test

(COM-TEST).

0xxx 0003 Server schedule is

not exist

Blank schedule data have

been received from UGW.

Perform and complete a

communication test (COM-

TEST).

0xxx 0003 Communication test

is not performed

Communication test has not

completed.

Perform and complete a

communication test (COM-

TEST).

84xx 0003 E-RDS switch is

setted OFF

A communication test has

been attempted with the

E-RDS switch being OFF.

Set E-RDS switch (E-RDS)

to 1, and then perform a

communication test (COM-

TEST).

8600 0002

8600 0003

8600 0101

8600 0201

8600 0305

8600 0306

8600 0401

8600 0403

8600 0414

8600 0415

Event Registration

is Failed

Processing (event processing)

within the device has failed.

Turn the device OFF/ ON.

If the error persists, replace

the device system software.

(Upgrade)

8700 0306 SRAM version

unmatch!

Improper value is written in

at the head of the NVMEM

domain (nonvolatile memory

domain) of E-RDS.

Turn the device OFF/ ON.

No.

Code

Character strings

Cause

Remedy

8700 0306 SRAM AeRDS

version unmatch!

Improper value is written in

at the head of the NVMEM

domain (nonvolatile memory

domain) of Ae-RDS.

Turn the device OFF/ ON.

8xxx 0004 Operation is not

supported

Method which E-RDS is not

supporting attempted.

Contact help desk

10 8xxx 0101 Server response

error (NULL)

Communication with UGW has

been successful, but an error

of some sort has prevented

UGW from responding.

When (Null) is displayed

at the end of the message,

this indicates that there has

been an error in the HTTPS

communication method.

Perform and complete a

communication test (COM-

TEST).

11 8xxx 0201

8xxx 0202

8xxx 0203

8xxx 0204

8xxx 0206

Server schedule is

invalid

During the communication

test, there has been some

kind of error in the schedule

values passed from UGW.

When the error occurs, report

the details to the support

section.

After the UGW side

has responded, try the

communication test again.

12 8xxx 0207

8xxx 0208

Internal Schedule is

broken

The schedule data in the

inside of E-RDS is not right.

Perform a communication test

(COM-TEST).

13 8xxx 0221 Server specified list

is too big

Alarm/Alert filtering error: The

number of elements of the list

specified by the server is over

restriction value.

Alert filtering is not supported

by UGW.

14 8xxx 0222 Server specified list

is wrong

Alarm filtering error: Unjust

value is included in the

element of the list specified by

the server.

Alert filtering is not supported

by UGW.

15 8xxx 0304 Device is busy, try

later

The semaphore consumption

error at the time of a

communication test.

Try again a communication test

after a period of time.

16 8xxx 0709 Tracking ID is not

match

When upgrading firmware, the

TrackingID notified by Updater

differs from the thing of UGW

designates.

Obtain the sublog, and contact

the support department of the

sales company.

17 8xxx 2000 Unknown error

Some other kind of

communication error has

occurred.

Perform and complete a

communication test (COM-

TEST).

18 8xxx 2001 URL Scheme

error(not https)

The header of the URL of the

registered UGW is not in https

format.

Check that the value of URL of

UGW (RGW-ADR) is https://

a01.ugwdevice.net/ugw/

agentif010.

Summary of Contents for imageRUNNER ADVANCE C3325 Series
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C3325 Series, Service Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands