Canon imageRUNNER ADVANCE C3325 Series Service Manual Download

Page: 744 / 951

8-193

Service Mode > COPIER > OPTION > LCNS-TR

COPIER>OPTION>ACC

Related user mode

Function Settings> Send> E-Mail/I-Fax Settings> Communication

Settings

Preferences> Network> TCP/IP Settings> DNS Settings> FTP Print

Settings, IPP Print Settings

Supplement/memo

Control card can be used with “No charge”.

DA: Digital Accessory

CARD-SW

Set screen dspl: Coin Manager connected

Lv.1 Details

To set coin or card that the user is prompted to insert on the Control

Panel when the Coin Manager is connected.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range 0 to 3

0: Coin, 1: Card, 2: Coin and card, 3: Card (for customization)

Default value

OUT-TRAY

Presence/absence of Third Delivery Tray

Lv.1 Details

To set whether the Third Delivery Tray is installed or not.

When it is installed, set 1.

Use case

When the Third Delivery Tray is installed

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range 0 to 1

0: Not installed, 1: Installed

Default value

CC-SPSW

Setting of control card I/F support

Lv.2 Details

To set support level of control card (CCIV/CCV) interface.

To keep processing performance of the printer engine, set 1.

To correctly stop the output by the upper limit number of sheets, set 2.

Use case

Upon user’s request (when connecting to the external counter

management system using the control card interface)

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

When 1 is set, output cannot be correctly stopped by the upper limit

number of sheets.

When 2 is set, processing performance of the printer engine is

decreased depending on pickup location.

Display/adj/set range 0 to 2

0: No support, 1: Priority on speed, 2: Priority on upper limit number of

sheets

Default value

COPIER>OPTION>ACC

UNIT-PRC

Setting of Coin Manager currency unit

Lv.2 Details

To set currency unit to be handled with Coin Manager.

Use case

At installation of Coin Manager

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range 0 to 6

0: Japanese yen, 1: Euro, 2: Pound, 3: Swiss Franc, 4: Dollar, 5: No

currency unit (no fractional unit), 6: No currency unit (with fractional

unit)

Default value

IN-TRAY

Presence/absence of Second Delivery Tray

Lv.1 Details

To set whether the Second Delivery Tray is installed or not.

When it is installed, set 1.

Use case

When the Second Delivery Tray is installed

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range 0 to 1

0: Not installed, 1: Installed

Default value

MIN-PRC

Set of Coin Manager minimum price

Lv.1 Details

To set the minimum amount to be handled with Coin Manager.

When UNIT-PRC is 0, enter “10” to specify 10 Japanese yen as the

minimum amount.

When UNIT-PRC is 1 to 4 (Euro/Pound/Swiss Franc/Dollar), entry is in

fractional unit. In the case of dollar, entry of “50” makes the minimum

amount to be 50 cents ($0.50).

When COIN is 4, this setting is enabled.

Use case

At installation of Coin Manager

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range 0 to 9999
Default value

Related service mode COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/memo

When a value smaller than the minimum amount is entered in Settings/

Registration menu as the charging amount, it causes an error.

MAX-PRC

Set of Coin Manager maximum price

Lv.1 Details

To set the maximum amount to be handled with Coin Manager.

When COIN is 4, this setting is enabled.

Use case

At installation of Coin Manager

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range 0 to 9999
Default value

8800

Related service mode COPIER> OPTION> ACC> COIN, UNIT-PRC
Supplement/memo

When a value larger than the maximum amount is entered in Settings/

Registration menu as the charging amount, it causes an error.

Summary of Contents for imageRUNNER ADVANCE C3325 Series
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C3325 Series, Service Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands