Canon imageRUNNER ADVANCE C3325 Series Service Manual Download

Page: 713 / 951

8-162

Service Mode > COPIER > OPTION > IMG-MCON

COPIER > OPTION > IMG-MCON

TNR-DWN

Setting of toner deposit amount

Lv.2 Details

To set the toner deposit amount on the gradation area and text area.

By reducing the toner deposit amount when toner scatters or

paper winds around the Fixing Belt in color mode, symptom can be

alleviated, but hue may change.

Use case

- When a full color image is blurred due to toner scattering, etc.

- When paper winds around the Fixing Belt

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

Hue may change depending on the setting.

Display/adj/set range

0 to 5

Gradation area 160%, Text area 150% (Thin paper/recycled paper 2)

Gradation area 200%, Text area 180% (Others)

1: 160%, 150%

2: 140%, 130%

3: 200%, 180%

Gradation area 140%, Text area 130% (Thin paper/recycled paper 2)

Gradation area 200%, Text area 180% (Others)

Gradation area 160%, Text area 150% (Thin paper/recycled paper 2/

transparency)

Gradation area 200%, Text area 180% (Others)

Default value

Related user mode

Adjustment/Maintenance> Adjust Image Quality> Adjust Toner Amount

at Color Printing

TMIC-BK

ON/OFF of TMIC Bk_LUT end edge correct

Lv.2 Details

To set ON/OFF of the trailing edge adjustment of Bk_LUT for PDL and

for copy which are used by TMIC.

When the trailing edge adjustment is set to ON, the density of the

high density area becomes high, and consequently text and thin lines

become clear. While an image becomes clear, hue of the gradation

area of photos, etc. is changed.

Use case

When thin lines are partly missing or characters are faded

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 3

0: ON for PDL, OFF for copy

1: OFF for PDL, OFF for copy

2: ON for PDL, ON for copy

3: OFF for PDL, ON for copy

Default value

COPIER > OPTION > IMG-MCON

DH-MODE

Set ptch data at Dhalf except full adj

Lv.2 Details

To set whether to use the high-density patch data that has been

scanned by D-half control of full adjustment at the time of D-half

control other than full adjustment.

Use case

At image adjustment

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: Used, 1: Not used

Default value

REDU-CNT

Set toner deposit amount limt at clr adj

Lv.2 Details

To set whether to limit the toner deposit amount at color adjustment

(color balance, fine adjustment of density).

When 0 is set, the color adjustment value is reflected to an image

precisely, but toner scattering in the transfer section and fixing section

may occur or paper may wind around the Fixing Belt.

Use case

- Upon user's request

- When reflecting the color adjustment value to an image precisely

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

When 0 is set, toner scattering in the transfer section and fixing section

may occur or paper may wind around the Fixing Belt.

Display/adj/set range

0 to 1

0: Toner deposit amount is not limited.

1: Toner deposit amount is limited to the specified amount.

Default value

VP-ART

Setting of line art processing

Lv.2 Details

To set outline processing for line art with trace & smooth PDF.

In the outline processing, a binary image outline is extracted in the

field which is recognized as line art, and is converted into vector data.

Specify whether to convert the binary image outline into vector data

or to recognize it as one line (as a thin line). For the thin line, the line

width can be specified.

Change this value when you want to obtain an output of a wide-width

line as one line rather than as an outline (when you want to prioritize

edit operation as a line rather than image quality).

Use case

Upon user's request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 99

Default value

Summary of Contents for imageRUNNER ADVANCE C3325 Series
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C3325 Series, Service Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands