Canon imageRUNNER ADVANCE C3325 Series Service Manual Download

Page: 693 / 951

8-142

Service Mode > COPIER > OPTION > DSPLY-SW

■

DSPLY-SW

COPIER > OPTION > DSPLY-SW

UI-COPY

ON/OFF of copy screen display

Lv.2 Details

To set whether to display the copy function.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: OFF, 1: ON

Default value

UI-BOX

ON/OFF of Inbox screen display

Lv.2 Details

To set whether to display the Inbox function.

The setting value1 and 2 of this item are linked with the values (ON

and OFF) of Store Location Display Settings> Main Box in Settings/

Registration menu respectively. The setting is reflected after turning

OFF/ON the power.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 2

0: OFF (No Inbox function. Storing is not available even with PDL to

Inbox.)

1: ON (Inbox function is active.)

2: ON (Storing is available with PDL to Inbox although no display on

the Control Panel/remote UI.)

Default value

Related user mode

Preferences> Display Settings> Store Location Display Settings> Mail

Box

UI-SEND

ON/OFF of Send screen display

Lv.2 Details

To set whether to display the SEND function.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: OFF, 1: ON

Default value

UI-FAX

ON/OFF of fax screen display

Lv.2 Details

To set whether to display the fax function.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: OFF, 1: ON

Default value

COPIER > OPTION > DSPLY-SW

T-LW-LVL

Set toner level warning mssg dspl timing

Lv.2 Details

To set the threshold value for the toner level in the Toner Bottle.

When the toner level becomes below the threshold while TNR-WARN

is 0, a warning message “Toner is low. Replacement not yet needed.”

is displayed on the Control Panel.

As the value is incremented by 1, the threshold is increased by 1%. As

the value is larger, the timing to display the message becomes earlier.

Use case

- Upon user’s request

- At the timing that the service technician visits to the customer, etc.

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

If you set a value smaller than the default value, absence of toner may

be displayed before the toner level warning message.

Display/adj/set range

5 to 100

Unit

1 %

Default value

It differs according to the location.

Related service mode COPIER> OPTION> DSPLY-SW> TNR-WARN

NWERR-SW

OFF/ON of network-related error display

Lv.2 Details

To set OFF/ON of network-related error message display.

When setting 0 while the machine is not connected to network, the

network-related error message “Check the network connection.” is not

displayed.

Use case

When using the machine only as a copy machine

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: OFF, 1: ON

Default value

1 (Normal model)/0 (Self-operated copy model)

FXMSG-SW

ON/OFF Fixing Unit replacement message

Lv.2 Details

To set whether to display the message prompting to replace the Fixing

Unit on the Control Panel when the counter for life judgment reaches

the specified value.

When the setting values of FXMSG-SW and FXWRNLVL are 1, the

Fixing Unit life detection is performed.

When the Fixing Unit reaches its life, the Fixing Unit replacement

message “Prepare new fixing roller. Call service representative.” is

displayed.

Use case

When detecting the life of Fixing Unit

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: OFF, 1: ON

Default value

Related service mode COPIER> OPTION> FNC-SW> FXWRNLVL

Summary of Contents for imageRUNNER ADVANCE C3325 Series
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C3325 Series, Service Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands