5
5
5-4
5-4
Adjustment■>■Pickup■Feed■System■>■Image■position■adjustment■>■Software■Adjustment
Adjustment■>■Pickup■Feed■System■>■Image■position■adjustment■>■Software■Adjustment
■
■
Software■Adjustment
■
●
Adjustment■method
Use■the■following■service■mode■to■make■an■adjustment.■(Refer■to■the■figure■displayed■by■
pressing■the■[i]■button.)
1)■Leading■edge
REGIST:■1/1■speed,■front■side
REG-DUP1:■1/1■speed,■back■side
REG-THCK:■1/2■speed,■front■side
REG-DUP2:■1/2■speed,■back■side
As■the■value■is■changed■by■1,■the■leading■edge■margin■is■changed■by■0.1■mm.
2)■Left■edge
ADJ-C1/C2/C3/C4/MF:■Front■side,■ADJ-C1RE/C2RE/C3RE/C4RE/MFRE:■Back■side
As■the■value■is■changed■by■1,■the■left■edge■margin■is■changed■by■0.1■mm.
3)■If■the■service■mode■has■been■changed,■write■the■new■adjustment■value■on■the■service■
label.
<Reference:■Standard■value>
Leading■edge■:■4.0+1.5/-1.0■mm■(front■side,■back■side)
Left■edge■:■2.5+/-1.5■mm■(front■side)■/■2.5+/-2.0■mm■(back■side)
Feeding direction
COPIER>ADJUST>FEED-ADJ
ADJ-xx/ADJ-xxRE
+
-
+
-
COPIER>ADJUST>FEED-ADJ
REGIST/REG-DUP1
REG-THCK/REG-DUP2
xx = C1/C2/C3/C4/MF
F-5-6
