Canon imageRUNNER ADVANCE C3325 Series Service Manual Download

Page: 630 / 951

8-79

Service Mode > COPIER > ADJUST > COLOR

COPIER>ADJUST>COLOR

PH-OFS-M

Adj M-clr hi dens area clr balance: PDL

Lv.2 Details

To adjust the color balance of the high density area of M-color at PDL

print.

The target data is the data generated by the printer driver and stored

in Mail Box.

As the value is larger, the image gets darker.

A value obtained by adding the value adjusted in [Fine Adjust Density]

in the main menu to the setting value of this item is applied as the

actual density value.

e.g.: When the value of this item is "-4" and the value of [Fine Adjust

Density] is "5", the density value is "1".

Note that the density value must be within the rage from -8 to 8.

e.g.: When the value of this item is "7" and the value of [Fine Adjust

Density] is "5", the density value is "8".

Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and

press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

-8 to 8

Default value

Related user mode

Access Stored Files> Mail Box> Print> Change Print Settings>

Options> Color Balance> Fine Adjust Density

PH-OFS-C

Adj C-clr hi dens area clr balance: PDL

Lv.2 Details

To adjust the color balance of the high density area of C-color at PDL

print.

The target data is the data generated by the printer driver and stored

in Mail Box.

As the value is larger, the image gets darker.

A value obtained by adding the value adjusted in [Fine Adjust Density]

in the main menu to the setting value of this item is applied as the

actual density value.

e.g.: When the value of this item is "-4" and the value of [Fine Adjust

Density] is "5", the density value is "1".

Note that the density value must be within the rage from -8 to 8.

e.g.: When the value of this item is "7" and the value of [Fine Adjust

Density] is "5", the density value is "8".

Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and

press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

-8 to 8

Default value

Related user mode

Access Stored Files> Mail Box> Print> Change Print Settings>

Options> Color Balance> Fine Adjust Density

COPIER>ADJUST>COLOR

PH-OFS-K

Adj Bk-clr hi dens area clr balance: PDL

Lv.2 Details

To adjust the color balance of the high density area of Bk-color at PDL

print.

The target data is the data generated by the printer driver and stored

in Mail Box.

As the value is larger, the image gets darker.

A value obtained by adding the value adjusted in [Fine Adjust Density]

in the main menu to the setting value of this item is applied as the

actual density value.

e.g.: When the value of this item is "-4" and the value of [Fine Adjust

Density] is "5", the density value is "1".

Note that the density value must be within the rage from -8 to 8.

e.g.: When the value of this item is "7" and the value of [Fine Adjust

Density] is "5", the density value is "8".

Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and

press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

-8 to 8

Default value

Related user mode

Access Stored Files> Mail Box> Print> Change Print Settings>

Options> Color Balance> Fine Adjust Density

T-8-27

Summary of Contents for imageRUNNER ADVANCE C3325 Series
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C3325 Series, Service Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C3325 Series

Reviews:

Related manuals for imageRUNNER ADVANCE C3325 Series

Brands by name

Popular brands