Canon imagePROGRAF iPF9400S, User Manual

Page: 193 / 972

Setting Item Details
Printer Default The setting of the control panel of the printer is applied.
5 mm (0.2 in) The document is printed in the standard size.
* Select this when you do not have any problems in printing.
20 mm (0.8 in) Select this when rubbing against the printhead occurs such as when using paper that tends to
curl.
F
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic
cutting is used.
Setting Item Details
Printer Default The setting of the control panel of the printer is applied.
High Speed When the Standard setting does not result in cutting the surface cleanly, select this.
Standard Select this when you do not have any problems in automatic cutting.
Low Speed This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select it
when using adhesive paper.
H
Calibration Value
You can specify whether to apply the results of calibration performed on the printer to image processing.
Setting Item Details
Printer Default The setting of the control panel of the printer is applied.
Enabled Print using the calibration results.
Disabled Print without using the calibration results. Select this to avoid the changing of the color of images
during printing by color calibration.
G
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with
the left and right sides inverted.
View Settings Dialog Box for the Printing Application View Settings Dialog Box for the Printing Application
In the View Settings dialog box, you can check details of the selected printing application.
iPF9400S View Settings Dialog Box for the Printing Application (Windows)
User's Guide
Windows Software
Printer Driver
193