Canon im2020, Setup Instructions

Page: 57 / 143

9219
– 4 –
4346-7741-02
■
Replacing the Coil Spring
1. Open the Front Door of the copier.
4346U001AA
2. Remove three screws and the Upper Cover.
4346U002AA
3. Remove the metal plate cover fixing bracket
(one screw).
4346U033AA
4. Remove six screws and the metal plate
cover.
4346U003AA
5. Remove the coil spring fitted to the copier
and, instead, fit the Coil Spring furnished with
the Duplex Unit in position.
NOTE
When replacing the coil spring, keep the
Right Door of the copier closed.
4346U004AA
6. Reinstall the metal plate cover, which has
been removed in step 4 (six screws).
NOTE
Make sure that the metal plate cover is
properly doweled to the copier.
4346U005AA
7. Reinstall the fixing bracket, which has been
removed in step 3 (one screw).
4346U033AA
8. Reinstall the Upper Cover, which has been
removed in step 2 (three screws).
NOTE
Fit the tab of the Upper Cover into the
rectangular hole in the copier side.
9. Close the Front Door.
4346U006AA