Canon im2020, Setup Instructions

Page: 51 / 143

9210
– 8 –
4344-7741-01
■ Affixing the Document Pad
■
Changing the Stopper Position
4344P004CA
* Feed (CD)
Enter the value obtained by dividing
the correction amount by 0.04.
4344P003CA 4344P001CA
Study the illustration on the left and adjust regis-
tration.
1. Press the Clear key.
2. Press the * key to change the sign to select
or -.
3. Enter the numeric value from the 10-Key
Pad.
4. Touch [END] to go back to the initial screen.
* Make a copy again and check for correct reg-
istration.
1166U038AA
Registration (FD)
Re
gi
str
atio
n (
CD)
+ direction - direction
- direction
+ direction
1. Raise the Duplexing Document Feeder.
2. With the rear edge of the Document Pad
pressed up against the Original Length
Scale, place it on the Original Glass so that
its left edge is 0.5 to 1.0 mm away from the
Original Width Scale.
4344U013AA
0 mm
0.5 to 1 mm
3. Peel off the release coated paper from the
sponges affixed to the Document Pad. Then,
gently lower the Duplexing Document
Feeder.
NOTE
When peeling off the release coated paper
and lowering the Duplexing Document
Feeder, use utmost care to prevent the
Document Pad from deviating from its
correct position.
4. Gently raise the Duplexing Document Feeder
and press the Document Pad up against the
Duplexing Document Feeder by hand so that
it is affixed in position.
4344U018AA
1. Remove the stopper from the hinge of the
Duplexing Document Feeder.
2. Change the set position of the stopper to the
upper side and secure it in position.
4344U020AA