Canon im2020, Setup Instructions

Page: 11 / 143

9217
– 4 –
4348-7747-02
■ Loading Paper
NOTES
•
Make sure that the top level of the paper stack does not exceed the
▼
(MAX)
paper level indicator.
•
Slide the Edge Guide tightly up against the edge of the paper stack so that there is
no gap between them.
•
With the Trailing Edge Stop, fit its locking tab properly into the slit at the correct
paper size position.
•
Correct any curl in the paper before loading.
■ Installing the Ornamental Cover
4348U100AC 4348U102AB
2. Install the Fixing Legs at two locations in the
front shown in the illustration. (six screws)
3. Install the Fixing Leg Covers at two locations
in the front shown in the illustration.
(2 Pieces)
NOTES
• Insert the Fixing Leg Covers in the direc-
tion shown by arrow until they click into
position.
• Insert the Protruded Portions of the cover
shown by the arrows into the Fixing Leg.
4348U023AD
②
①
③
①
②
③
4. Install the Fixing Legs at two locations in the
rear shown in the illustration. (six screws)
5. Install the Fixing Leg Covers at two locations
in the rear shown in the illustration.
(2 Pieces)
NOTES
• Insert the Fixing Leg Covers in the direc-
tion shown by arrow until they click into
position.
• Insert the Protruded Portions of the cover
shown by the arrows into the Fixing Leg.
4348U024AD
②
①
③
①
②
③
4348U101AC 4348U102AB
1. Slide out the 3rd and 4th Drawer.
2. Load the paper stack so that it rests below
the tab fitted to the Edge Guide.
4348U095AA
4348U091AA
4348U048AA
1. Install the Ornamental Cover attached to the
copier (two screws).
2. Slide the drawer back in.
3. Affix the Paper Size Label furnished with the
Paper Feed Cabinet to the location shown in
the illustration. (The size label is similarly put
on the 4th.)
4348U052AA
4348U049AA
4348-7747-02.fm Page 4 Wednesday, July 30, 2003 12:09 PM