Canon im2020, Setup Instructions

Page: 111 / 143

– 2 –
4513-7746-02
■
Required tool:
• Phillips screwdriver
3. Installa tion
• Before performing any operations, check that the amount of available memory is
100%.
• If the amount of available memory is not 100%, explain this to the customer, and then
either print out or delete any data in the memory.
• After checking that the amount of available memory is 100%, turn off the copier.
Unplug the power cord.
• The illustrations used in this manual may show a unit that differs from your machine,
depending on the model.
3.1 Installing the Printer Controller (
ZC3500080
or
ZC3500130),
Network Scan Kit (
ZC3500110
)
and Internet Fax & Network Scan
Kit (
ZC3500120
)
(1) Removing the outer covers and plates
1. Remove the rear cover.
Remove the 3 screws at the back of the
copier, and then remove the rear cover.
(By slightly opening the document cover
and pressing down on the ADF angle-
detecting lever at the top of the rear cover,
the rear cover can be more easily removed.)
C4514U001AA
■ Setup Overview
9216 9217 9218
9210
9219
9219000000
ZC3500070
9211
Mailbin Finisher* 9214
ZC3500060
Copier: Printer
9212
Memory
*Not offered
ZC3500130
ZC3500080
ZC3500110
ZC3500050
ZC3500080
Note: When setting
up a system consisting
of the copier and options,
set up each system
component in the order
shown at right.
ZC3500090