Canon im2020, Setup Instructions

Page: 46 / 143

9210
– 3 –
4344-7741-01
■ Adjusting the Height of Duplexing Document Feeder
1. Place the Document Pad, with its side to which sponges are affixed facing up, onto the
Original Glass.
* At this time, do not peel off the release coated paper.
5. Connect the hookup harness connector of
the Duplexing Document Feeder to the
mating connector on the copier side.
4344U011AA
6. Fit the hookup harness into the hook on the
copier.
4344U012AA
2. Loosen the nut on the upper side of the left
hinge as viewed from the control panel side
(by turning it in the direction of B).
4344U017AB
Nut
B
4344U027AB
3. Prepare a strip of paper using copy paper,
place it at the location shown in the
illustration, and gently lower the Duplexing
Document Feeder.
* Prepare the strip of paper as follows:
Size: 20 mm
× 210 mm
Paper weight: 60 to 80 g/m
2
4344U014AB
210 mm
4344U016AA
20 mm