Canon im2020, Setup Instructions

Page: 106 / 143

Network Scan Kit ( ZC3500110 )/Internet Fax & Network Scan Kit ( ZC3500120 ) Installation Guide
4514-7744-02 ND-100095 (E)
(3) Install the network interface card
Add the network interface card.
See the Network Interface Card Installation Guide for more information.
(4) Reassembly
Perform the disassembly steps in reverse to reassemble.
NOTE
• Make sure that plugs are oriented correctly when connecting cables.
• Tighten screws so the spacing between adjoining covers is uniform.
• Give the CD-ROM containing electronic manuals and Utility Disk to the customer.
2. Install the circuit board that comes with this
kit into expansion slot 2 (CN5) on the
printed circuit board assembly’s MFB3 cir-
cuit board.
NOTE
• Do not touch the terminals of the circuit
board with your bare hands.
Making sure that the notch in the circuit
board is oriented correctly, install the
board so it snaps securely into place.
• When adding a Printer Controller (
ZC3500080
or
ZC3500130
), install the printer circuit
board into expansion slot 1 (CN4) here.
See the Network Interface Card Installa-
tion Manual for more information.
3. With the im2520f reconnect the Ni-MH
battery cable to CN3 on the MFB3 circuit
board.
NOTE
Failure to reconnect the battery cable will
leave the machine without backup power in
case of a power failure. Be sure to reconnect
the battery cable.
C4514U010AB
Expansion slot 2 (CN5)
CN3
SU2-3_IG.fm Page 2 Wednesday, July 9, 2003 9:59 AM