Canon im2020, Setup Instructions

Page: 85 / 143

9212
– 4 –
4512-7741-02
17. Press the Punch Unit tightly up against the
copier frame.
18. Tighten the screw shown to secure the
Punch Unit in position (one screw).
19. Securely tighten the screw, which has been
temporarily tightened in step 15 (one screw).
4512U017AA
20. Pass the harness of the Punch Unit through
cord clamps and route it tidily.
4512U018AA
21. Connect the connectors.
4512U019AA
22. Reinstall the reinforcement plate that has
been removed in step 4 (two screws).
4512U020AA
23. Install the Punch Box.
24. Reinstall the Finisher cover that has been
removed in step 3 (four screws).
25. Mount the Finisher to the copier.
NOTE
For the procedure to install the Finisher,
see 9211 Setup Instructions. 4512U022AA
4512‑7741‑02.fm 4 ページ ２００３年１０月３日 金曜日 午前１０時１１分