Canon im2020, Setup Instructions

Page: 79 / 143

9211
– 6 –
4349-7741-02
5. Using Screw B, secure the ground wire.
NOTE
Make sure that the ground wire runs in the
direction shown in the illustration when
secured.
4349U034AB
6. Connect the connector.
7. Using Screw C, secure the ground wire.
4349U051AB
8. Using Screws C, secure the Secondary
Cover in position (two screws).
NOTE
Make sure that there is a uniform clearance
between the Misfeed Clearing Dial and
Secondary Cover.
4349U036AC
9. Using Screw D, secure the Secondary Cover
(one screw).
4349U037AA
10. Install the Front Cover to the copier.
4349U055AA
11. Close the Front Cover.
12. Snap the E-ring into position.
4349U052AA
13. Remove the cover from the Exit Cover that
has been removed in step 2 of “Installing the
Finisher Unit” (two screws).
4349U039AB
14. Remove the label from the Front Cover.
15. Using the screws removed in step 13, secure
the cover that has been removed in step 13
to the Front Cover (two screws).
4349U040AD