Canon im2020, Setup Instructions

Page: 70 / 143

ZC3500070
– 3 –
4347-7741-02
4. Unplug the connectors of the Switchback
Unit.
4347U005AA
5. Remove the screws at the front (two screws).
6. Loosen the screws in the rear (two screws).
4347U006AC
7. Raise the Switchback Unit and then pull it off
the copier.
4347U007AA
8. Remove the Tray.
4347U008AA
9. Remove the cover (two screws).
4347U009AA
10. Press the Sensor Unit up against the
Switchback Unit and secure the Sensor Unit
using Screws A (two screws).
NOTE
Do not hold the Lever.
4347U010AD
Lever
11. Pass the harness through the cord clamps
and edge covers and route it tidily.
NOTE
Make sure that there is no loose of the
harness.
4347U011AB
12. Reinstall the cover that has been removed in
step 9 (two screws).
4347U012AA