Canon im2020, Setup Instructions

Page: 140 / 143

– 3 –
9. Install the cover over the external connectors. (2 screws)
10. Remove the screw at the rear of the
machine.
C4513U106AA
11. Attach the edge cover to the mounting
bracket (for the parallel interface circuit
board).
C4513U119AA
12. Hook the mounting bracket (for the parallel
interface circuit board) onto the machine to
attach it, and then secure it with the screw
that was removed. Then, pass the harness
for the power supply fan through the edge
cover.
C4513U107AA
Tab
13. Remove the two screws from the connector
on the parallel interface circuit board.
C4513U108AA
14. Attach the parallel interface circuit board to
the rear of the machine, and then secure it
to the mounting plate using the two screws
that were removed.
C4513U109AA
15. Secure the parallel interface circuit board to
the mounting bracket. (enclosed 2 screws)
C4513U110AA