Canon im2020, Setup Instructions

Page: 59 / 143

9219
– 6 –
4346-7741-02
■
Adjusting the Paper Reference Position
1. Touch “END” on the Test Print screen.
4348P017CA
2. Select “Duplex” on the Registration (CD)
screen. (This highlights the “Duplex” key.)
4348P015CA
3. Press the Clear (C) key and, using the 10-
Key Pad, change the setting value as
detailed below.
•
If width A is greater than the specified value
(e.g. +1.0 mm), enter -1.0.
•
If width A is smaller than the specified value
(e.g. -1.0 mm), enter +1.0.
* Press the “
✽
” key to select or -.
4348U093CA
* If the Adjust mode is not effective enough to
make the adjustment, perform the following
procedure [paper reference position adjust-
ment (2)].