9214
– 5 –
4511-7741-02
■
Installing the Saddle Unit
13. Reinstall the cover which has been removed
in step 11.
*
Be sure first to fit the tab into position.
(1 screw)
4512U021AC
1. Install the Shutter Mounting Holder to the
tray unit using Screws B. (2 screws)
4511U024AA
2. Using Shoulder Screws B, secure the
Shutter to the Shutter Mounting Holder.
(2 screws)
*
Through the hole shown in the illustration,
loosen the screw of the Shutter Mounting
Holder. (See step 5 that follows.)
4511U025AB
Hole
3. Move the Shutter up and down. Release the
Shutter from a higher position to check to
ensure that the Shutter falls by its own
weight.
4. If the Shutter does not fall by its own weight,
raise the Shutter.
5. Loosen the screw of the Shutter Mounting
Holder that is visible through the hole shown
and adjust the position of Shoulder Screw B.
4511U026AA
6. Remove the Finisher Exit Tray. (2 screws)
4510U010AA
7. Remove the Exit Tray mounting holders on
the right and left. (1 screw each)
4510U011AA
8. Remove the right and left covers. (2 screws
each)
4510U012AB
4511‑7741‑02.fm 5 ページ 2003年10月3日 金曜日 午前10時11分
Summary of Contents for im2020
