Canon im2020, Setup Instructions

Page: 12 / 143

9217
– 5 –
4348-7747-02
■ Checking the Paper Reference Position
1. Turn ON the copier.
2. Call the Tech. Rep. Mode to the screen.
*
See the Service Manual for the procedure.
4348P005CB
3. Follow these steps to call the Adjust mode to
the screen.
* With the Tech. Rep. Mode displayed on the
screen, press the Stop key and then Start
key, in that order.
4. Touch “Printer” to call up the Printer screen.
4348P003CA
5. Touch “Registration (CD)” to display the
Registration (CD) screen.
4348P009CA
6. Touch “Test Print” to display the Test Print
screen.
4348P015CA
7. Touch “3rd Drawer.” (This highlights the “3rd
Drawer” key.)
4348P017CA
8. Press the Start key on the control panel.
(The copier will produce an output of a test
print.)
4002O280CB
9. Measure width A on the test print and check
to see if the measured dimension falls within
the specified range.
<Specifications: 10 ± 2.0 mm>
A
4348U054AA
10. If the measured width A falls within the
specified range, press the Panel Reset key
to recall the Basic screen.
* Do the same procedure for the 4th that for
3th drawer.
11. If the measured width A falls outside the
specified range, perform the following
procedure to adjust the paper reference
position.
4348-7747-02.fm Page 5 Wednesday, July 30, 2003 12:09 PM