manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 78 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 78

Part 1: Facsimile

Paper feed error detection

There are three types of paper feed 

 which may occur:

 

a) No 

 error

NOTE

Occurs 

when the Paper Edge Sensor does not 

 the paper’s leading 

the start of the paper picked up operation is executed, it is executed again. If
the paper is still not sensed   it is assessed as a No paper error.

b) Eject delay jam

Occurs when 

 Paper Edge Sensor 

 not 

 the paper’s trailing edge

after the page has been printed, or after 22 inches (568.8 mm) of paper eject
operation has been performed.

c) 

Paper size error

When 

the size of the paper being fed is 

 from that 

 in the

user data, and the page being printed is divided during printing, a 

 

error will occur.

When a paper feed error occurs, memory reception begins from 

 page at

which the 

 feed error occurred.

When copying, the data are erased from memory as 

   an error occurs.

2-10

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments