manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 134 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 134

Part 1: Facsimile

 CLEAR (data 

 mode)

Various data are initialized by selecting one of these setting items. There is a setting item

for checking/inputting the total number of pages printed and total number of pages
scanned by this fax.

 ROM (ROM 

management)

ROM data such as the version number and checksum are displayed.

 REPORT (Service report output function)

Service 

report output function.

5.2.2 

Service data registration/setting method

Service data can be registered/set by the following operations:

 Fax Only

Standby (date and Receive mode display)

(1) User data mode selection

Press the FUNCTION button, and then   button.

(2) Service data mode selection

Press 

 button.

(3) Menu item selection

Select the menu item by pressing the   or   button

Press the START/COPY button.

(4) Data registration

Input the data and press the START/COPY button.

Press the STOP button to return to standby.

Figure 3-15 Service Data Setting Method

3-32

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments