manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 61 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 61

Chapter 1: General Description

5.4 

Data-related precautions

The memory IC on the circuit board stores the 

 registration data and values for various

counters, etc., required for servicing. Although this data is normally retained in memory, it

 be deleted by mistake. 

 handling this data during servicing, note the following

precautions.

Figure 1-22 Memory IC and Backed up Devices

NOTE

PC 

registration function

Using 

 

 

 

 that comes with this product, the

user setting items 

 in 

 

 

 be reprogrammed. The 

of these 

 

 stored as 

 in the settings 

 in the PC, and at

the 

 time arc 

 into thr 

 setting items in 

 SRAM, via

hi-centronics 

 function 

 that, 

 replacing the

lithium battery,   

 

 

 normally entail 

 loss of data,

if the user’s 

 

 

 settings files, there is no need to 

 

 

 

 to 

 

 

 Manager 

 Guide for

details of this 

 

 

 that 

 

 are not

saved.

l-47

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments