manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 29 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 29

Chapter   General Description

 One-Touch Speed Dial/Special Function buttons

Use these buttons for one-touch speed dialing, entering user

information, 

 documents stored in memory, and cleaning the

print head. For more information on the special function buttons.

  N u m e r i c   b u t t o n s

Use 

 buttons to type numbers and names when entering

information, 

 to dial fax/telephone numbers that 

 not 

for automatic dialing.

 

  b u t t o n

Press this button to 

 the last number that was dialed using the

number buttons, or to enter pauses between digits 

when 

dialing fax

numbers.

 CODED DIAL button

Press this button (followed by entering a two-digit code with the
numeric buttons) to dial a fax number that you have registered for

 

 dialing.

 START/COPY button

Press this button to 

 sending, receiving, scanning, or other

operations, or to select functions when registering information.

  A L A R M   l a m p

This 

 flashes when an 

 occurs, or when the 

 

is 

 of paper or ink.

  S T O P   b u t t o n

 this button to cancel sending, receiving, or any other 

Figure 1-6 Operation Panel 

1-15

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments