manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 128 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 128

 1: Facsimile

4.3 

Errors not Shown on the Display

4.3.1 General errors

l 

The unit does not turn on. (Evaluation criteria: Look at the actual unit.)

(1) Check the power cord connection.

 Check the connection between the PCNT board 

 and power supply unit.

 the connection between the SCNT board 

 

 and PCNT board

 

(4) Check the power supply unit’s fuse 

 Replace the 

 supply unit.

l 

The display looks abnormal. (Applicable test mode: Operation panel test)

Nothing is displayed.

 the connection between the Operation panel unit and SCNT board

(2) Replace the Operation panel unit.

 Replace the SCNT board.

Part of the LCD panel does not display anything.

(1) Check for LCD problems with the test mode.

 Check the connection between the Operation panel unit and SCNT board 
 Replace the Operation panel unit. (Faulty LCD)
 Replace the SCNT board.

l 

The keys do not work. (Applicable test mode: Operation panel test)

 If the test mode can be used, check for faulty keys.
 Check the connection between the Operation panel unit and SCNT board 
 Replace the Operation panel unit.
 Replace the SCNT board.

l 

No 

sound from the speaker

(1) Check 

 

 of the speaker and PCNT board 

 Replace the speaker.
 Replace the I’CNT board.

3-26

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments