manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 110 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 110

Chapter 3: Maintenance   Service

3.2 

Vertical Alignment Correction

a) Overview

Vertical alignment during bi-directional printing can be corrected by adjusting the print
starting position. No tools are required for this adjustment.

b) 

 the test pattern

Follow the procedure below to print out the test pattern.

START/COPY

START/COPY

Printing the Test Pattern

1

Figure 3-3 Printing the Test Pattern

The test pattern can be printed only when Black 

 Cartridge 

 and

Color 

 Cartridge (BC-21) are used. Photo Color 

 Cartridge 

 cannot

NOTE

be used.

c) How to read the Test pattern

As shown in Fig. 

 the test pattern shows the SHQ, SHQZ (Not used), HQ (normal mode),

HS (economy mode) and uni-direction printing condition from the top. The 

vertical lines for HQ and 

 

 be moved 

 or right on the second row (of three 

As shown in 

Fig. 

3-6, 

adjust so that the vertical lines in the middle are correctly aligned.

 

 

Figure 3-4 Test Pattern Sample

3-7

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments