manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 32 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 32

Part 

1: 

Facsimile

3.3 

Consumables

3.3.1 BJ cartridge and ink cartridge and BJ cartridge container

Choosing the Best Cartridge

Canon offers several BJ print cartridges and ink tanks for 

 in 

 

 

 print cartridges contain the BJ print head and ink,

while BJ ink 

 contain only ink.) Use 

 following 

 to

 which type of cartridge 

 suits your particular needs.

To avoid printing 

 

 only the 

 BJ cartridge for

normal printing (or the separately sold UC-20 Black BJ 

 if 

rarely print color). The 

 

 Color   Cartridge (sold

separately) is for printing photo-realistic color 

 Other cartridges

can produce unsatisfactory results. In addition, use only 

 Black

and BCI-21 Color ink tanks   

 

 Color BJ cartridge.

 Color BJ Cartridge

The 

 incorporates a   

 head

and two replaceable ink tanks   BCI-21

Black and a BCI-21 Color). Use this cartridge

for 

 printing.

 

 

 BJ cartridge

1-18

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments