manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 43 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 43

Chapter   General Description

Unplug 

 

 

 and 

 your local authorized

Canon dealer 

 

 center in 

 of these situations:

l

If 

 power cord   plug is damaged or frayed.

l

If liquid spills into the unit, or if it is otherwise exposed to rain 
liquids.

l

If you notice smoke 

 

 noises or 

odors coming from it.

l

If the 

 

 does not operate normally when you

follow the operating instructions. Adjust only those controls that
are covered by the operating instructions in this user’s guide, 
you can damage the unit and require extensive repair work.

l 

If the 

 

 is dropped 

 

 cabinet damaged.

l 

If the 

 

 begins performing poorly, and you

cannot correct the problem by using the procedures in Chapter 6,

FCC rules governing the use of fax equipment, require that you register

your fax number, your 

 

 company name, and the date and time

in 

 

 

 before using it. 

 instructions, see “Entering

User Information in the 

 

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments