manualshive.com logo in svg

Canon C5000 - MultiPASS Color Inkjet Printer, Service Manual, Page: 55 / 221

Share
Download
Canon C5000 - MultiPASS Color Inkjet Printer Service Manual Download Page 55

Chapter 1: General Description

c) 

Preventing ink clogging

Do not touch the ink cartridge’s ink outlets. Doing so may introduce foreign matter into

the printing head’s joint pipes, causing poor ink suction. After removing the cap from the

ink cartridge, immediately install the ink cartridge in the printing head to prevent the ink
at the nozzles from drying out and clogging. Do not 

 the ink cartridge except when

it is to be replaced.

Color Ink Cartridge

Yellow

Ink Outlet

Black Ink Cartridge

NOTE

Cyan Ink Outlet

(Contact Section

 the Joint Pipe)

‘Black Ink Outlet

(Contact Section

of the Joint 

Figure 1-19 Ink Outlet

If the ink nozzles are clogged or if 

 ink suction is poor, the printout may

have horizontal white stripes. If the cleaning operation 

 not 

 it

to 

 replace the 

 cartridge.

1-41

Summary of Contents for C5000 - MultiPASS Color Inkjet Printer






























































































































































































































Reviews:

No comments